48
5. Selection of interface to printer
Selecting the PRINTER mode, the serial output of the balance is set to work with serial
printers.
In this case the printing is effected only when the PRINT button is pressed and with
stable weight. If the stability is not reached within ten seconds, the message ERROR05
is displayed preceded by a short acoustic signal and the value of the weight is not sent to
the printer.
The connector to be used for the connection is the number 4 shown in fig.1 of par. 0
6. Connection of the balance with the serial printer
Connect a serial printer to connector 1 to the balance as shown in the following scheme:
If the optional TLP50 printer is used, it will be possible to print both in continuous-mode
and in labels-mode with the following formats:
Weighing mode and maximum load mode Piececounting mode
Density determination mode Percentage weight mode
Animal weighing mode Totalizing (sum of weights) mode
2
4
5
Input data
Busy signal
GND
Balance
side
Printer side
Connector
12-02-2008
12:00
Weight: 22.000 g
12-02-2008
12:00
d= 2.80066 g/cm3d
12-02-2008
12:00
Pcs
100
Weight:
300.000 g
PMU: 3.000 g
12-02-2009
12:00
Perc. 100.0%
Weight:
300.000 g
12-02-2010
12:00
Time = 6 Sec
Ave. = 59.446 g
12-02-2009
12:00
1. 16.589 g
2. 17.226 g
…
99.
------------------------------
S= 33.815 g
