27
19 Piececounting function
1. From zero condition on display, press MENU button until the message “Count “ is
displayed then press the PRINT button to confirm
2. Select the number of pieces to put on the pan as sample by pressing MENU
repeatedly to increase and CAL to decrease the number. Choice of the number of
pieces (10, 25, 50, 100) depends from the weight of single pieces.
If available, load the empty container first then press PRINT to confirm.
3. Load on the pan the number of pieces displayed on the balance display
4. Press again the PRINT button and wait the weight to stabilize.
If the number of samples is enough (for example 10 as in figure), then this number
will be displayed and it will be possible to go on by loading the pieces to count on the
balance pan.
If the weight of the pieces to count is too low in comparison with balance resolution,
then an error message will be displayed. In this case it is necessary to use a balance
with higher resolution.
