29
19.2 Manual insertion of the unit average weight
It is possible to insert the unit average weight of the sample, if known. In this way can be
avoided the sampling of the units.
1. From zero condition on display, press the MENU button until the message “Count”,
then press the PRINT button to confirm.
Select MANUAL by pressing repeatedly the MENU button.
2. Press the PRINT button to confirm.
3. Insert the unit weight of a sample in grams using CAL and MENU buttons for
increase and decrease the value and use the O/T button to skip to the others digits.
For insert the For inserting the decimal point keep pressed the CAL button. Keeping
pressed the O/T button is possible to delete the inserted value.
4. Press the PRINT button to confirm.
If the inserted weight is 100 times lower than balance resolution, it will be displayed
an error message.
To escape without inserting the weight press ON/OFF.
5. If the weight is enough then “0” is displayed ; it is now possible to go on to count
loading the pieces on the pan.
6. Press MENU button to display the total number of pieces, then press again the button
to display again the number of pieces.
7. To escape from piececounting function, press ON/OFF button.
