43
5. If the value of the thresholds is correctly inserted, the balance will be back to the
weighing mode with the indication of the threshold state (H = higher threshold, L =
lower threshold, OK= weight within the two set thresholds).
NOTE: If the values are not inserted correctly will be displayed the string ERROR 07.
There are 3 modes of the threshold function:
25.1 Both thresholds set
This mode allow to set the lower and the higher threshold values and to identify the
acceptable range for the weight value shown by the switching on of the symbol “OK” and
by the acoustic alarm is activated. When the value of the weight is under the lower
threshold value set will be displayed the symbol “ L” while if the weight is over the higher
threshold value set will be displayed the symbol “ H ”.
25.2 Lower threshold set only
Setting only the lower threshold and setting to zero the higher threshold, will be displayed
the symbol “OK” and eventually the acoustic alarm if activated whenever the loaded
weight is higher than the lower threshold value set. When the value of the weight is under
the lower threshold set the symbol “ L” will be displayed.
25.3 Higher threshold set only
Setting only the higher threshold and setting to zero the lower threshold, will be displayed
the symbol “OK” and eventually the acoustic alarm if activated whenever the loaded
weight is lower than the higher threshold value set. When the value of the weight is
above the higher threshold set the symbol “ H” will be displayed.
