15
4. After having selected the desired weight unit, press the MENU button to go to next
parameter or CAL button to return to previous.
5. To escape from parameters setup menu, press the MENU button until the acoustic
alarm is over, then release the button. The balance returns to normal weighing
conditions.
* The unit of measure with the star (*) are not available in the balances with the software
for paper grammage. In these models is possible to set from the menu of the units of
measure the multiply factor of the weight “M 10” or “M 100”. For visualizing the m² weight,
select the M 100 multiply factor (as described at par.9) and load on the pan a 10x10 cm
piece of paper.
10x10cm paper sample
