VTI Instruments EX1000A User Manual Download Page 277

Page: 277 / 320

www.vtiinstruments.com

EX10xxA Function Calls

277

Error Code Error Message

Meaning

0xBFFC0902L #define VTEX10XXA_ERROR_INVALID_TRIG_INF_VALUE

Invalid trigger infinite value.

0xBFFC0903L #define VTEX10XXA_ERROR_INVALID_ARM_INF_VALUE

Invalid arm infinite value.

0xBFFC0904L #define VTEX10XXA_ERROR_INVALID_NUM_SCANS

Invalid number of scans.

0xBFFC0905L #define VTEX10XXA_ERROR_READ_FIFO_TIMEOUT

Timeout on read FIFO.

0xBFFC0906L #define VTEX10XXA_ERROR_STRMING_DATA_ENABLED

Streaming data already enabled.

0xBFFC0907L #define VTEX10XXA_ERROR_ENABLING_STRMING_DATA

Enabling streaming data failed.

0xBFFC0908L #define VTEX10XXA_ERROR_STRMING_DATA_NOT_ENABLED

Streaming data not enabled.

0xBFFC0909L #define VTEX10XXA_ERROR_DISABLING_STRMING_DATA

Disabling streaming data failed.

0xBFFC090AL #define VTEX10XXA_ERROR_INSUFFICIENT_FIRMWARE_REV

Insufficient firmware revision.

0xBFFC090BL #define VTEX10XXA_ERROR_VXI_11

VXI-11 Error.

0xBFFC090CL #define VTEX10XXA_ERROR_INVALID_FILTER_FREQ

Invalid filter frequency.

0xBFFC090DL #define VTEX10XXA_ERROR_STRMIN_ALREADY_ENABLED

Streaming data already enabled on instrument.

0xBFFC090EL #define VTEX10XXA_ERROR_INVALID_NUM_ENTRIES

Invalid number of entries.

0xBFFC090FL #define VTEX10XXA_ERROR_NEGATIVE_TIME

Illegal negative time.

0xBFFC0910L #define VTEX10XXA_ERROR_DEVICE_LOCKED

Device locked.

0xBFFC0911L #define VTEX10XXA_ERROR_DEVICE_NOT_LOCKED

Device not locked.

0xBFFC0912L #define VTEX10XXA_ERROR_CALIBRATION_IN_PROGRESS

Calibration in progress.

0xBFFC0913L #define VTEX10XXA_ERROR_CALIBRATION_MISSING

Calibration missing.

0xBFFC0914L #define VTEX10XXA_ERROR_TRIGGER_SYSTEM_ERROR

Trigger system error.

0xBFFC0915L #define VTEX10XXA_ERROR_INSUFFICIENT_UPTIME

Insufficient uptime for requested operation.

0xBFFC0916L #define VTEX10XXA_ERROR_OUT_OF_LINK_IDS

Maximum number of link IDs exceeded.

0xBFFC0917L #define VTEX10XXA_ERROR_INVALID_LINK_ID

Invalid link ID.

0xBFFC0918L #define VTEX10XXA_ERROR_DUPLICATE_SCANLIST_CHNL

Duplicate channel In scanlist.

0xBFFC0919L #define VTEX10XXA_ERROR_SELF_CAL_MISSING

Self-calibration missing.

0xBFFC091AL #define VTEX10XXA_ERROR_UNKNOWN_FIRMWARE_ERROR

Unknown firmware error.

0xBFFC091BL #define VTEX10XXA_ERROR_INVALID_DIO_LIMIT

Invalid DIO limit value.

0xBFFC091CL #define VTEX10XXA_BOOLEAN_OUTA_RANGE

Out of range Boolean value.

0xBFFC091DL #define VTEX10XXA_NOT_A_VALID_RSRC

Not a valid resource string.

0xBFFC091EL #define VTEX10XXA_ERROR_ALREADY_LOCKED_U

Instrument already locked by this host.

0xBFFC091FL #define VTEX10XXA_ERROR_ALREADY_LOCKED_NU

Instrument already locked by another host.

0xBFFC0920L #define VTEX10XXA_ERROR_ALREADY_UNLOCKED

Instrument is not locked at this time.

0xBFFC0921L #define VTEX10XXA_ERROR_NONVOL_SELF_CAL_MISSING

Nonvolatile self calibration data missing.

0xBFFC0922L #define VTEX10XXA_ERROR_FIFO_EMPTY

FIFO is empty.

0xBFFC0923L #define VTEX10XXA_ERROR_STRING_TOO_BIG

Input buffer contains too many characters.

0xBFFC0924L #define VTEX10XXA_ERROR_PTP_NOT_RUNNING

Precision time protocol not running. Try
reconfiguring time settings, or a power cycle.

0xBFFC0925L #define VTEX10XXA_ERROR_INVALID_BOOLEAN_VALUE

Invalid Boolean value.

0xBFFC0926L #define VTEX10XXA_ERROR_WIREDOR_MUST_BE_SET

Wired-OR must be set.

0xBFFC0927L #define VTEX10XXA_ERROR_INVALID_TIMER_COUNT

Invalid timer count.

0xBFFC0928L #define VTEX10XXA_ERROR_INVALID_TIMER_TIME

Invalid time setting.

0xBFFC0929L #define VTEX10XXA_ERROR_INVALID_LAN_SOURCE

Invalid LAN source.

0xBFFC092AL #define VTEX10XXA_ERROR_INVALID_LAN_EVENT_DOMAIN

Invalid LAN domain.

0xBFFC092BL #define VTEX10XXA_ERROR_INVALID_LAN_EVENT_EVENTID

Invalid LAN Event ID.

0xBFFC092CL #define VTEX10XXA_ERROR_INVALID_LAN_EVENT_FILTER

Invalid LAN filter.

0xBFFC092DL #define VTEX10XXA_ERROR_INVALID_OP_WHILE_LOG_ENABLED

This operation is not valid while LAN event
logging is enabled.

0xBFFC092EL #define VTEX10XXA_ERROR_PPS_REQUIRES_DIO0_OUTPUT_LOW

PPS enable requires DIO0 output to be enabled
and low.

0xBFFC092FL #define VTEX10XXA_ERROR_GAIN_OUT_OF_RANGE

Linear correction gain value out of range.

0xBFFC0930L #define VTEX10XXA_ERROR_OFFSET_OUT_OF_RANGE

Linear correction offset value out of range.

0xBFFC0931L #define VTEX10XXA_ERROR_INVALID_CORRECTION_LIST_LENGTH

Linear correction list length must be the same as
channel list length.

0xBFFC0932L #define VTEX10XXA_ERROR_INVALID_GAIN_LIST_LENGTH

Gain list length must be the same as channel list
length.

0xBFFC0933L #define VTEX10XXA_ERROR_OPERATION_VALID_ONLY_ON_VOLT_CH This operation is only valid on general purpose

voltage channels.

0xBFFC0934L #define VTEX10XXA_ERROR_INVALID_EVENTLOG_OVERFLOWMODE

Invalid event log overflow mode.

0xBFFC0935L #define VTEX10XXA_ERROR_INVALID_CAL_FILE_TYPE

Invalid calibration file type.

0xBFFC0936L #define VTEX10XXA_ERROR_ACQUISITION_IN_PROGRESS

Acquisition in progress.

0xBFFC0937L #define VTEX10XXA_ERROR_FACTORY_MODE_ONLY

Only works when calFileType parameter is a
value greater than 0.

0xBFFC0938L #define VTEX10XXA_ERROR_CAL_FILE_TOO_LARGE

Unable to load the entire calibration file into
memory.

Summary of Contents for EX1000A

































































































































































































































































































































Search results

Summary of Contents for EX1000A

Reviews:

Related manuals for EX1000A

Brands by name

Popular brands

VTI Instruments EX1000A, User Manual

Search results

Summary of Contents for EX1000A

Reviews:

Related manuals for EX1000A

Brands by name

Popular brands