VTI Instruments EX1000A, User Manual

Page: 127 / 320

www.vtiinstruments.com
EX10xxA Function Calls 127
API Description
vtex10xxA_get_system_time
Returns the instrument’s current time in seconds.
vtex10xxA_get_trig_lan_eventID Returns the event ID of a LAN trigger event.
vtex10xxA_get_trig_lan_filter Returns the filter for a LAN trigger event.
vtex10xxA_get_trigger_count Returns the trigger count value.
vtex10xxA_get_trigger_delay Returns the trigger delay.
vtex10xxA_get_trigger_infinite Returns the enabled status of an infinite trigger
count.
vtex10xxA_get_trigger_source Returns the trigger source excluding LAN events.
vtex10xxA_get_trigger_sourceEx Returns the trigger source including LAN events.
vtex10xxA_get_trigger_timer Queries the timer interval for the timer source
event.
vtex10xxA_get_user_cjc_enable Returns the enabled status of a user-defined CJC
temperature of a specified channel.
vtex10xxA_get_user_cjc_temp Returns the user-defined CJC temperature of a
specified channel.
vtex10xxA_get_user_conversion Returns the user-defined conversion polynomials.
vtex10xxA_get_vtb_input Returns the current input state of the trigger bus.
vtex10xxA_get_vtb_output Returns the programmed output state of the trigger
bus.
vtex10xxA_get_vtb_output_enable Returns the output enable state of the trigger bus.
vtex10xxA_get_vtb_wiredor Returns the Wired-OR state for each LXI Trigger
Bus channel.
vtex10xxA_get_vtb_wiredor_bias Returns the Wired-OR bias enable state for each
LXI trigger bus channel.
vtex10xxA_init Opens an instrument programming session.
vtex10xxA_init_imm Performs a trigger initialize.
vtex10xxA_lock Attempts to acquire a lock on the instrument.
vtex10xxA_pop_logged_LAN_event Returns an oldest event log entry in the
instrument.
vtex10xxA_read_fifo Retrieves acquisition data.
vtex10xxA_read_fifoEx Retrieves acquisition data with timestamps and
CJC data.
vtex10xxA_reset Performs an instrument reset.
vtex10xxA_reset_fifo Clears the FIFO memory.
vtex10xxA_reset_trigger_arm Performs a reset of the trigger configuration
parameters.
vtex10xxA_revision_query Returns the release revision of the instrument
driver and embedded firmware.
vtex10xxA_self_cal_clear Clears the current self cal data.
vtex10xxA_self_cal_clear_stored Clears self cal data from nonvolatile memory.
vtex10xxA_self_cal_get_status Returns the completion status of self-calibration.
vtex10xxA_self_cal_init Performs an instrument self-calibration.
vtex10xxA_self_cal_is_stored Returns the presence of self cal data in nonvolatile
memory.
vtex10xxA_self_cal_load Loads nonvolatile self cal data as the current self
cal data.
vtex10xxA_self_cal_store Stores the current self cal data into nonvolatile
memory.
vtex10xxA_self_test Performs a self-test in synchronous mode.
(Currently supported only in RX10xx.)
vtex10xxA_self_test_init Performs a self test operation in asynchronous
mode. (Currently supported only in RX10xx.)
vtex10xxA_set_alarm Sets the alarm time, period, and count for the LXI
alarm source event.
vtex10xxA_set_alarm_enable Enables or disables the use of the LXI alarm.
vtex10xxA_set_arm_count Sets the arm count value.
vtex10xxA_set_arm_delay Sets the arm delay.
vtex10xxA_set_arm_infinite Enables or disables the use of an infinite arm
count.
vtex10xxA_set_arm_lan_eventID Sets the event ID of LAN arm event.