VTI Instruments EX1000A, User Manual

Page: 284 / 320

VTI Instruments Corp.
284 EX10SC Signal Conditioning
NOTES It is important to note that, if connected to a high energy source, damage to the EX10xxA and/or
EX10SC systems and the plug-ins installed can occur. To avoid damage due to high energy sources,
the following precautions should be made:
1) Limit the input current and/or power to the values listed in the plug-ins maximum
specifications.
2) Employ current/power limiting devices (such as fuses) to ensure that excessive current/power
is mitigated in the event a system fault occurs.
C
ONNECTING TO AN
EX10
XX
A
TO THE
EX10SC
The EX10SC output signals are designed to be routed directly to the input channels of the EX1000A,
EX1016A or EX1032A via a D-sub cable. The cable (VTI P/N 70-0397-000) directly connects the
EX10SC outputs to the user selected input D-sub connector on either the EX1000A, EX1016A, or
EX1032A.
Connector Pin/Signal Assignment
The table below provide signal and connector pin information for the interconnect cable. For mating
connector information, please refer to the
Accessories section of the EX10SC General
Specifications .
Pin Signal Pin Signal Pin Signal
1 CJC_RETURN 18 CHASSIS GND 34 CJC_INPUT0
2 +OUTPUT_CH7 19 CHASSIS GND 35 -OUTPUT_CH15
3
-OUTPUT_CH7
20
CHASSIS GND
36
+OUTPUT_CH15
4
+OUTPUT_CH6
21
CHASSIS GND
37
-OUTPUT_CH14
5 -OUTPUT_CH6 22 CHASSIS GND 38 +OUTPUT_CH14
6 +OUTPUT_CH5 23 CHASSIS GND 39 -OUTPUT_CH13
7
-OUTPUT_CH5
24
CHASSIS GND
40
+OUTPUT_CH13
8 +OUTPUT_CH4 25 CHASSIS GND 41 -OUTPUT_CH12
9 -OUTPUT_CH4 26 CHASSIS GND 42 +OUTPUT_CH12
10 +OUTPUT_CH3 27 CHASSIS GND 43 -OUTPUT_CH11
11
-OUTPUT_CH3
28
CHASSIS GND
44
+OUTPUT_CH11
12 +OUTPUT_CH2 29 CHASSIS GND 45 -OUTPUT_CH10
13 -OUTPUT_CH2 30 CHASSIS GND 46 +OUTPUT_CH10
14 +OUTPUT_CH1 31 CHASSIS GND 47 -OUTPUT_CH9
15 -OUTPUT_CH1 32 CHASSIS GND 48 +OUTPUT_CH9
16 +OUTPUT_CH0 33 CHASSIS GND 49 -OUTPUT_CH8
17 -OUTPUT_CH0 50 +OUTPUT_CH8
T
ABLE
9-2: EX10SC I
NTERCONNECT
C
ABLE
C
ONNECTOR
P
IN
S
IGNAL
A
SSIGNMENT