VTEL WG500, Installation Manual

Page: 99 / 104

WG500 System
D.7
WG500
TM
Contents of Registration Envelope
NOTE: In the United States this product must be connected to a registered terminal adapter and is
not intended for direct connection to the switched telephone network.
In the event of equipment malfunction, all repairs should be performed by our Company or an
authorized agent. It is the responsibility of users requiring service to report the need for service to
our Company or to one of our authorized agents. Service may be obtained at VTEL, 3100
Horizon Drive, King of Prussia, PA 19406; FAX: 610-239-5622.
WG500 System
FCC Notice (US only)
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
IC Notice (Canada only)
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of Industry Canada (IC).
CE Notice
The CE Marking indicates compliance with the European Union EMC (Electro Magnetic
Compatibility) directive, the Low Voltage Directive, and when applicable, the
Telecommunication Terminal Equipment Directive.
A “Declaration of Conformity” (DOC) in accordance with the relevant standards and directives
has been made and is on file at VTEL.
trade name model number
number of C.O.
ports number of
stations number of
generic ports
MXV 5040 5040 1 n/a n/a