VTEL WG500, Installation Manual

Page: 55 / 104

AppsView toolbars
4.7
WG500
TM
Making an H.320 (WAN) to H.320 (WAN) call
An H.320 to H.320 call should be made when both the caller and the recipient are on a
WAN network, which includes networks such as ISDN, Switched56, Leased Lines and
Direct Connect.
1.
Click the Show Connection Interface button, then select the Hand-Dialer tab.
•
The number fields on the Hand-Dialer tab also
accept alphabetic entries, such as 1800EXAMPLE.
4 Click the digits
on the keypad to
enter the number
you want to dial,
or use your
keyboard.
5 Click the Dial
button to place the
call.
Backspace
Clear all the digits
you have entered.
Enter the number you
wish to dial (B: will only
be active if the call is a
2x56 or 2x64 call).
Click the Hangup
button to disconnect.
3 Select a line speed.
2 Select H.320 (WAN) from the Call
Using
field.