VTAC HSD USER MANUAL: SECTION 10
VIRGINIA PANEL CORPORATION
1/9/19
12-6
For the most current information available, visit vpc.com
4. Quality Assurance Provisions
4.1. Qualification Testing
4.1.1. Sample Selection
Samples shall be prepared in accordance with applicable instruction sheets and shall be selected at random from current
production.
4.1.2. Test Sequence
Qualification inspection shall be verified by testing samples as specified in Table 3 2.
4.2. Requalification Testing
If changes significantly affecting form, fit or function are made to product or manufacturing process, product assurance shall
coordinate requalification testing, consisting of all or part of original testing sequence as determined by development/product
and reliability/quality engineering.
4.3. Acceptance
Acceptance is based on verification that product meets requirements of Table 3 1. Failures attributed to equipment, test set-up
or operator deficiencies shall not disqualify product. When product failure occurs, corrective action shall be taken and samples
resubmitted for qua lification. Testing to confirm corrective action is required before resubmittal.
4.4. Quality Conformance Inspection
A Certificate of Conformance (C of C) dimensional inspection must be completed for all samples prior to Qualification testing.
The applicable quality inspection plan will specify sampling acceptable quality level to be used. Dimensional and functional
requirements shall be in accordance with applicable product drawing and this specification.
Product Performance Specifications
