VTAC HSD USER MANUAL: SECTION 7
VIRGINIA PANEL CORPORATION
1/9/19
7-3
For the most current information available, visit vpc.com
TOOLS REQUIRED
VTAC HSD Right Angle Insert Installation Tool, Part # 910 112 132
INSERT INSTALLATION INSTRUCTIONS
6. Position the board so that the contacts and alignment pins are aligned to the proper holes as shown in in
Figure F.
7. Then place the board onto the contacts and hold the board in position as shown in
Figure G
.
8. Place the other half of the tool on the top and hold the two halves together with the board in between them. Make sure that the
contacts and the alignment pins are going into the correct holes as shown in
Figure H and I
.
Figure G. Place board onto insert(s). Ensure alignment of
contacts and pins.
Figure I. Check alignment of contacts and alignment pins with holes.
Figure F. Installing the VTAC HSD Right Angle Insert(s).
Figure H. Join two halves of tool.
POSITION
BOARD
ALIGNMENT
PINS
CONTACTS
CHECK
ALIGNMENT
