VTAC HSD USER MANUAL: SECTION 10
VIRGINIA PANEL CORPORATION
1/9/19
10-1
For the most current information available, visit vpc.com
VTAC HSD VERTICAL INSERT PCB INSTALLATION
INSTRUCTIONS FOR 90 SERIES MODULES
PART # 610 151 107
TOOLS REQUIRED
VTAC HSD Vertical Header Insert Installation Tool, Part # 910 112 133
INSERT INSTALLATION INSTRUCTIONS
1. The insertion tool is a two-piece assembly, comprised of a base and a top. Orient the assembly so that it matches
Figure A
.
2. Remove the top from its base. Notice the alignment pins on either side of the base. These alignment pins will be later used to
locate the PCB and the base (
Figure B
).
3. Load the desired number of inserts into the base as shown. Position the inserts so that the mating-side of the inserts are
oriented towards the base and the compliant pins are oriented towards the top (
Figure C
).
Figure A. Proper orientation of part # 910 112 133.
Figure B. Remove the top of the insertion tool from its base.
Figure D. Ensure that the edges of the insert are fully
seated in the base of the insertion tool.
Figure C. Load the desired number of inserts into the base.
TOP
BASE
ENSURE SIDES OF
INSERT(S) ARE FULLY
SEATED
ALIGNMENT
PINS
