VTAC HSD USER MANUAL: SECTION 1
VIRGINIA PANEL CORPORATION
1/9/19
1-3
For the most current information available, visit vpc.com
i2 MX RECEIVER PART IDENTIFICATION
PART # 310 130 XXX
Figure B. i2 MX receiver front view.
Figure C. i2 MX receiver side view.
ALPHA KEYING
RECEPTACLE
NUMERIC KEYING
RECEPTACLE
TOP
BOTTOM
FRONT
MATING
SIDE
REAR
WIRING
SIDE
POLARIZING
FEATURE
POSITION
A1
INDICATOR
Figure D. i2 MX receiver rear
view.
Figure B
points out distinguishing features of the i2 MX receiver so that the top and
bottom can be identified. Features to look for are the numeric keying receptacle at
the top and the alpha keying receptacle on the bottom.
When holding the i2 MX receiver, the top can be determined when the letters and
numbers are oriented as shown in
Figure B
. The top position is designated by a black
marking around the upper slot in Tier A and Tier B module locations (
Figure B
).
The front and rear of the i2 MX receiver are shown in
Figure C
. The front has a
polarizing feature which prevents the ITA and receiver from being engaged in the
incorrect orientation. The front of the i2 MX receiver can be identified as the side with
the latching feature (
Figure A
).
Figure D
shows the rear silkscreen that aides in indicating positions.
The front side mates with the i2 MX ITA. Wires exit the i2 MX receiver from the rear side.
MOUNTING
SCREWS TYP. 4
PLCS
INDICATES 5
POSITIONS
LATCHING
FEATURE
Figure A. i2 MX receiver
TIER B
TIER A
