VTAC HSD USER MANUAL: SECTION 2
VIRGINIA PANEL CORPORATION
1/9/19
2-7
For the most current information available, visit vpc.com
VTAC HSD INSERT REMOVAL INSTRUCTIONS FOR i2 MX ITA
PART # 410 130 XXX
STRAIN RELIEF
CLAMP
NUT
BACKSHELL
SCREWS
REMOVAL INSTRUCTIONS (CONTINUED)
4. Using a Phillips head screwdriver, loosen the six screws
(captive) that secure the backshell halves. Remove the
half with the screws (
Figure C
).
5. Using a nut driver remove nuts on the strain relief clamp,
then remove the clamp (
Figure D
).
Figure C. Backshell cover removal.
Figure D. Strain relief clamp removal.
