VTAC HSD USER MANUAL: SECTION 1
VIRGINIA PANEL CORPORATION
1/9/19
1-1
For the most current information available, visit vpc.com
VTAC HSD 90 SERIES RECEIVER MODULE PART IDENTIFICATION
PART # 510 170 101
This section will point out features designed to help determine the proper orientation
of the VTAC HSD 90 Series receiver module (
Figure A
), as well as distinguishing
features.
The top of the VTAC HSD 90 Series receiver module can be determined by the position
A1 indicator, designated by the notch shown in
Figure B
. When the module is oriented
correctly, the position A1 notch will be visible in the upper left corner.
The front and rear of the VTAC HSD 90 Series receiver module are shown in
Figure C
.
The front has the position A1 notch. The front side mates with the VTAC HSD 90 Series
ITA module.
The rear of the VTAC HSD 90 Series receiver module has silkscreening along the side.
Wires exit the VTAC HSD 90 Series receiver module from the rear side.
NOTE: The blue silkscreen indicates fi ve slot positions, as shown in
Figure D
.
Figure B. Receiver module front view
(mating side).
Figure C. Receiver module
side view.
Figure D. Receiver module
rear view (wiring side).
Figure A. Receiver Module.
FRONT
MATING
SIDE
REAR
WIRING
SIDE
POSITION A1
INDICATOR
TOP
BOTTOM
MOUNTING SCREWS
TYP. 2 PLCS
EXTRACTION TOOL CAVITY
DETAIL A
INDICATES 5 POSITIONS
2-56 TAPPED HOLES FOR
STRAIN RELIEF PLATE SCREWS
TYP. 2 PLCS
