VTAC HSD USER MANUAL: SECTION 2
VIRGINIA PANEL CORPORATION
1/9/19
2-8
For the most current information available, visit vpc.com
VTAC HSD INSERT REMOVAL INSTRUCTIONS FOR i2 MX ITA
PART # 410 130 XXX
Figure E. Seat removal tool.
Figure F. Insert removal.
PLUNGER
GRIP
PUSH
PLUNGER
SEATED
FLUSH
VTAC HSD INSERT REMOVAL INSTRUCTIONS (CONTINUED)
1. Group the required number of extraction tools
together for the given VTAC HSD patchcord shown in
Figure E
. The tool pins should be on opposite sides of
the patchcords or wires to be removed.
WARNING
: All inserts within each patchcord must be
extracted simultaneously to prevent damage to VTAC HSD
Inserts.
NOTE: The extraction tools are magnetic to aid in stacking
them together.
2. While grasping the extraction tool(s) body from the
sides (
Figure E
), slide tool pins into module’s extraction
cavity slots until the tool plunger is flush with the tool
body and the plunger is in contact with the VTAC HSD
insert tips shown in
Figure E
.
WARNING:
The extraction tool(s) need to be seated against
the module front face before the plunger is pushed in.
Otherwise damage to insert(s) may occur.
3. Push plunger of extraction tool(s) in to extract VTAC
HSD Insert(s). The insert(s) will be ejected out the wiring
side of the module shown in
Figure F
.
