VTAC HSD USER MANUAL: SECTION 2
VIRGINIA PANEL CORPORATION
1/9/19
2-1
For the most current information available, visit vpc.com
VTAC HSD INSERT INSTALLATION/REMOVAL INSTRUCTIONS
Figure B. VTAC HSD Insert install and removal detail (ITA Shown).
TOOLS REQUIRED
VTAC Extraction Tool Kit, Receiver and ITA, Part # 910 112 130
VTAC HSD INSERT INSTALLATION INSTRUCTIONS
1.
When inserting a VTAC HSD Insert stack, the blue insert is on top as shown
in
Figure B
. Inserts are fully seated when the back of the inserts are fl ush
with the module (
Figure A
).
VTAC HSD INSERT REMOVAL INSTRUCTIONS
1. Group the required number of extraction tools together for the given VTAC
HSD patchcord. For example, a USB 3.0 patchcord requires two tools as
shown in
Figure B
.
WARNING
: All inserts within each patchcord must be extracted simultaneously
to prevent damage to VTAC HSD Inserts.
NOTE: The extraction tools are magnetic to aid in stacking them together.
2. The indivdual patchcords can be identifi ed by a blue insert, indicating the
beginning of a new stack or single insert patchcord as shown in
Figure B
.
NOTE: The slots on one side of the module are a slightly
different width than the other side to ensure the insert is
oriented correctly, as shown in Detail C in
Figure C
.
NOTE: For patchcords with more than 3 inserts, multiple VTAC tool kits (910 112
130) will be required.
Figure C. VTAC HSD Insert install and removal detail (ITA
Shown).
MATING FACE
EXTRACTION TOOL CAVITY
EXAMPLE OF A HDMI PATCHCORD
3 EXTRACTION TOOLS REQUIRED
EXAMPLE OF AN USB PATCHCORD
2 EXTRACTION TOOLS REQUIRED
SINGLE PATCHCORD 1 EXTRACTION
TOOL REQUIRED
EXAMPLE OF A HDMI PATCHCORD
3 EXTRACTION TOOLS REQUIRED
DETAIL C
Y1 LARGE SIDE
Y2 SMALL SIDE
C
WIRING SIDE
BLUE INSERT
Figure A. VTAC Insert alignment.
NOT FLUSH
FLUSH
