Fig. 3-24: Peel off the cable as per the length of wiring terminal
Fig. 3-25: Press on the wiring terminal firmly
7) Estimate the cable length, peel off the cable as per the length of the wiring part of the
OT cold pressed terminal, and press on the OT cold pressed terminal by a pair of press
pinchers;
Fig. 3-26: Connect the DC cable reliably
8) Connect the cable to the wiring terminal by a screw driver reliably;
9) Tighten the waterproof DC input terminal cover;
10) Connect all DC cables reliably as per the steps above.
L
L
Tip
To facilitate wiring operation and device maintenance, the
estimated cable length shall be 10cm longer than the actual
cable length to the terminal.
Installation
ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
23
/47
