The following tools will be used for installing the inverter:
Fig. 3-3: Tools for installation
3.3.2 Preparation for tools
3.4 Selection for a installation position
Some parts (e.g.: heat radiator) of the inverter runs with a high
temperature, so it is not suitable for installing near inflamma-
bles or explosives.
Danger
Notice
When selecting an installation position, please avoid the
influence of noise and electro magnetic radiation to the
environment;
Notice
The inverter performance will be degraded if the environmental
temperature is 45
above. Make sure the inverter is installed
in a well ventilated place so that the power generation can be
maximized.
℃
The inverter cannot be installed near any place of high
external electro magnetic radiation (e.g.: a TV tower,
communication signal tower or HV cables).
ф6 percussion drill
Press pinchers
Screw driver and wrench
Multimeter
Hammer
Installation
ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
10
/47
