Fig. 3-8: Schematic drawing for back board installation (on a support)
Fig. 3-9: Schematic drawing for inverter installation (on a support)
4) Install the back board on the support by the fasteners;
5)Carefully lift up the inverter and hang it on the back board slowly according to the notch
and slot, and then visually check if the inverter is correctly installed;
6)After installation, you can choose if it is necessary to attach the inverter with an
anti-theft lock.
M10 Hexagon headed bolt
Support
Back board
Gasket
Clips
M5 50 Hexagon nut
*
3.5.3 Optional anti-theft lock
An anti-theft lock can be used to lock the inverter on the back board and protect the out-
door installed inverter from theft.
Fig. 3-10: Schematic drawing for an anti-theft lock
Installation
ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
14
/47
1
2
