Fig. 3-5: Schematic drawing for the
minimum spacing dimensions for
inverter installation
Fig. 3-6: Schematic drawing for back board installation (on a wall)
Tab. 3-2: Effective spacing dimensions
Position
Front
20mm
Lateral
4
0mm
Top
4
0mm
Bottom
5
0mm
Min. size (cm)
Take out the back board from the package, and then install the back board on the firm wall
by expansion screws or on a metal support by bolts.
1) Take out the back board and mark the installation holes;
If the inverter is to be installed on a firm wall, please operate as per the following steps:
35mm
240mm
40cm
50cm
50cm
40cm
40cm
40cm
120mm
Expansion tubes
Back board
Tapping screws
3.5 Inverter installation
3.5.1 Installation on a wall
2) Drill holes in the marked position as per the size of expansion screws;
3) Insert the expansion tubes into the hole, knock the tubes into the hole and make
them level with the wall surface;
4) Fix the back board to the wall by the tapping screws tightly;
Installation
ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
12
/47
