Fig. 3-10: Size of an anti-theft lock
A
B
A: 3 mm - 6 mm
B: 30mm - 40mm
C: 30mm - 40mm
Size:
C
3.6 Electrical connection
The lock size shall satisfy the following requirement:
After the inverter is correctly installed on the wall or support, the next step is the electrical
connection for the inverter. Electrical connection must be performed according to related
safety standards.
The electrical connection for an inverter covers electrical cable connection and communi-
cation cable connection.
A misoperation electrical connection may cause personal injury
or death or damage the inverter irreversibly. Wiring operation
must be performed by a qualified electrical engineer.
Notice
The anti-theft lock selected must be suitable for outdoor
installation;
Regularly check if the lock can be normally opened;
The key to the anti-theft lock must be well kept.
Danger
Warning
Warning
Warning
All electrical installation must be complying with local and
national electrical standards.
The inverter cannot be connected to the grid unless approved
by the local electrical authority and all electrical connections
are completed by a qualified electrical engineer.
Please use cables of specification recommended by us, or the
system safety may be degraded.
Installation
ShiniCube1600TL-3300TL User Manual
Victory Power New Energy
VP-UMSC1.0.0EN
15
/47
