UNIFREM v.3.41x
10 May 2017
Page 9 from 180
EXAMPLE:
MENU \ SETTINGS \ MOTOR \
Motor current value setting
Nominal motor voltage value setting
Parameter, that is derived by calculation based on the values of other parameters.
EXAMPLE:
MENU \ SETTINGS \ MOTOR \ SPECIAL PARAMETERS \
Example of the calculated parameter
Name [ID]
Description
Def.
Nom. Current
[151]
Nominal motor current, read from the nameplate or catalog data.
2.80 A
0.01 A ÷ 1000.00 A
This parameter determines the value of permanent motor current for motor
overload protection P[27] Motor overloading.
MENU \ SETTINGS \ MOTOR \
Basic information about the importance of the parameter
Range of the value, that
parameter can take Min ÷ Max
Additional information
about the importance of the
parameter
The default value of the parameter
–
The value that is set at factory settings
restoration
Parameter type: CALCULATED PARAMETER
Name [ID]
Description
Def.
Nr of motor poles [1049]
Number of motor poles calculated from the nominal rpms and the motor
frequency.
2 ÷ 1000
MENU \ SETTINGS \ MOTOR \ SPECIAL PARAMETERS \
Additional information about derivation of parameter calculation
