UNIFREM v.3.41x
10 May 2017
Page 176 from 180
EXAMPLE:
PARAMETER
”
Ramp-up 1 slope (ID 124)
”
–
Parameter is displayed grey.
After confirmation
–
ENTER,
option to make parameter
available is displayed
Transfer to the parameter to make
available in the set after pressing
F2
Parameters can be of different types and therefore their setting is different.
Parameter group
- grouping of parameters having common functionality
- creates a tree structure
- return to the higher level
Command start and execution
Press the button at the selected item with the parameter
type of command
Execution must be confirmed by
Numeric value setting
-setpoint value setting
-cahnge of adjusted numerical order
(cursor position change)
The maximal and minimal possible displayed adjustable
value as well as physical units of the parameter are
displayed in this window. The change of the displayed
engineering units (n,
, m, k, M, G,...) is done automatically,
if it is allowed by these physical units. Cursor is displayed
