UNIFREM v.3.41x
10 May 2017
Page 11 from 180
EXAMPLE:
Example: V/f curve operation mode selection
Command to execute a single action or operation on the converter. It is required to confirm the
command before execution in the confirmation window.
EXAMPLE:
This command resets consumed energy counters
Parameter for dynamic ties and any parameter connection, that becomes a value source for a
given function or for input of this function.
EXAMPLE:
MENU \ SETTINGS \ INPUTS AND OUTPUTS \ ANALOG OUTPUTS \ AO1 \
Selection of the signal that will linearly recalculate the analog output AO1
Parameter type: COMMAND
Name [ID]
Description
Def.
Reset the consumption [897]
This command resets the counters of consumed energy.
MENU \ SETTINGS \ CONVERTER PARAMETERS \ Energy consumption \
Function, description and importance of the command
Name and command ID
Parameter type: SIGNAL
Name [ID]
Description
Def.
AIN1 Signal [251]
Selection of the signal that will be linearly recalculated according to the
analog input.
[ - ]
MENU \ SETTINGS \ INPUTS AND OUTPUTS \ ANALOG INPUTS \ AIN1 \ SPECIAL SETTING \
Type of signal selection from the diagnostics
Signal name
