UNIFREM v.3.41x
10 May 2017
Page 43 from 180
7.2.1 MOTOR MACROS
Group of parameters number [672]
MENU \ SETTINGS \ MOTOR \ MOTOR MACROS
Name [ID]
Description
Def.
Motor 400/0.06 [730]
Parameters of the 400V, 60W motor.
Motor 400/0.09 [731]
Parameters of the 400V, 90W motor.
Motor 400/0.12 [732]
Parameters of the 400V, 120W motor.
Motor 400/0.18 [733]
Parameters of the 400V, 180W motor.
Motor 400/0.25 [734]
Parameters of the 400V, 250W motor.
Motor 400/0.37 [735]
Parameters of the 400V, 370W motor.
Motor 400/0.55 [736]
Parameters of the 400V, 550W motor.
Motor 400/0.75 [737]
Parameters of the 400V, 750W motor.
Motor 400/1.1 [738]
Parameters of the 400V, 1.1kW motor.
Motor 400/1.5 [739]
Parameters of the 400V, 1.5kW motor.
Motor 400/2.2 [673]
Parameters of the 400V, 2.2kW motor.
Motor 400/3 [674]
Parameters of the 400V, 3kW motor.
Motor 400/4 [675]
Parameters of the 400V, 4kW motor.
Motor 400/5.5 [676]
Parameters of the 400V, 5.5kW motor.
Motor 400/7.5 [677]
Parameters of the 400V, 7.5kW motor.
Motor 400/11 [678]
Parameters of the 400V, 11kW motor.
Motor 400/15 [679]
Parameters of the 400V, 15kW motor.
Motor 400/18.5 [680]
Parameters of the 400V, 18.5kW motor.
Motor 400/22 [681]
Parameters of the 400V, 22kW motor.
Motor 400/30 [682]
Parameters of the 400V, 30kW motor.
Motor 400/37 [683]
Parameters of the 400V, 37kW motor.
Motor 400/45 [684]
Parameters of the 400V, 45kW motor.
Motor 400/55 [685]
Parameters of the 400V, 55kW motor.
Motor 400/75 [686]
Parameters of the 400V, 75kW motor.
Motor 400/90 [687]
Parameters of the 400V, 90kW motor.
Motor 400/100 [688]
Parameters of the 400V, 100kW motor.
Motor 400/110 [689]
Parameters of the 400V, 110kW motor.
Motor 400/132 [727]
Parameters of the 400V, 132kW motor.
Motor 400/160 [728]
Parameters of the 400V, 160kW motor.
Motor 400/200 [729]
Parameters of the 400V, 200kW motor.
Motor 400/250 [1236]
Parameters of the 400V, 250kW motor.
Motor 400/315 [1237]
Parameters of the 400V, 315kW motor.
7.2.2 IDENTIFICATION
Group of parameters number [1497]
Parameters for identification modes for V/f (scalar) and vector mode of operation.
MENU \ SETTINGS \ MOTOR \ IDENTIFICATION
Name [ID]
Description
Def.
Offline
identification
[992]
Command for the inital (offline) identification of the motor electric parameters.
It is used to configure the motor electric parameters and the vector control. Please,
look to Manual for vector control setting.
Preset
vector
control [991]
Command to preset the control structures of vector control to values corresponding
to motor.
This command serves for initial setting of the control structures of vector control.
Ident. Lm (short)
[1498]
Identification (measurement) of mutual inductance. After the START command the
motor will rotate at the predefined speed to measure the mutual inductance. It is
neccesary to disconnect the load from the motor shaft.
Mag.
curve
identification
Identification (measurement) of motor magnetization curve. After the START
command the motor will rotate at the predefined speed to measure the
