UNIFREM v.3.41x
10 May 2017
Page 118 from 180
Name [ID]
Description
Def.
Bit1 set signal
[645]
Signal that is evaluated if the 1st bit of the binary switch is active. Either
numeric or discrete signal can be chosen.
[184] Binary
inputs
Signal
Bit1 set switch-
on [646]
Conditions for switching on Bit1.
Look choises of parameter's Binary inputs [184] (page 17)
Bit1 set switch-
off [647]
Bit1 switch-off: In case of a numeric signal if the signal value is lower than
the defined level.
Look choises of parameter's Binary inputs [184] (page 17)
Bit2 set signal
[648]
Signal that is evaluated if the 2nd bit of the binary switch is active. Either
numeric or discrete signal can be chosen.
[184] Binary
inputs
Signal
Bit2 set switch-
on [649]
Conditions for switching on Bit2.
Look choises of parameter's Binary inputs [184] (page 17)
Bit2 set switch-
off [650]
Bit2 switch-off: In case of a numeric signal if the signal value is lower than
the defined level.
Look choises of parameter's Binary inputs [184] (page 17)
Bit3 set signal
[651]
Signal that is evaluated if the 3rd bit of the binary switch is active. Either
numeric or discrete signal can be chosen.
[184] Binary
inputs
Signal
Bit3 set switch-
on [652]
Conditions for switching on Bit3.
Look choises of parameter's Binary inputs [184] (page 17)
Bit3 set switch-
off [653]
Bit3 switch-off: In case of a numeric signal if the signal value is lower than
the defined level.
Look choises of parameter's Binary inputs [184] (page 17)
7.11.2 USER SETS
Group of parameters number [1290]
Settings of user sets. These sets can store up to 20 selected parameters. There is available up to 32
different values for each selected parameter.
MENU \ SETTINGS \ PAR. SETS \ USER SETS
Name [ID]
Description
Def.
Switch sets
[1480]
Switching of user sets. Selection of binary combination of individual sets. Its value
represents the actual foursome of sets. First three selected bits are applied.
Switch switches the foursome of sets 1-4, 5-9, ... Selection of a specific set from the
selected foursome depends on the switching of normal sets.
Look choises of parameter's Bit1 DS mask [553] (page 55)
Set
shift
[1483]
Set shift allows to assign different set as intended to the combination of set switch. The
set switch is combined as normal and user set switch.
0
-
31 ÷ 31
If the shift is 0, the binary switch 00000 corresponds to set 1, 00001 - set 2, etc. If the shift is 1,
00000 corresponds to set 2, 00001 - set 3, etc ...
User
set
[1481]
Number of active user set.
PARAMS SELECT
Group of parameters number [1291]
Selection of 20 parameters that can store up to 32 different values. After selecting the parameter, its value
can not be changed in its original location, but in the user sets for the selected set.
MENU \ SETTINGS \ PAR. SETS \ USER SETS \ PARAMS SELECT
Name [ID]
Description
Def.
Param 1 [1300]
-
Signal
