Operation & Maintenance Manual
──
LG956L Wheel Loader
67
switch group turns to OFF and put it up; the head lamp, tail light and back light is lightened if the
switch group turns to the position of ‘
’ or ‘
’. The high beam of front headlight lights if put
it up.
Control of high and low light
When the starting switch is in the ON position, the low beam of front headlight is lightened if the
switch group turns to the position of‘
’. The high beam of front headlight is lightened when the
switch is put down.
Control of turning lamp
The left turning lamp is lightened when the switch is put forward, and the right turning lamp is
lightened when the switch is put backward.
Notice:
The turning indicator lamp is lightened when operate the switch. After the operation of turning
finished, please put back the switch by your hand.
z
Rocker switch
The rocker switch includes gauge panel rocker switch and rocker switch at the right side of seat. The
gauge panel rocker switch can be referred to
1.1 Control System and the Gauge Figure 3-4
in this chapter. When the start switch is at
ON
position, the water sprayer, rain wiper, rear lighting
lamp, front lighting lamp, back headlight and warning lamp will be controlled separately by this
switch. The rocker switch at the right side of seat is shown in the following figure. When the start
switch is at
ON
position, the unit heater, water sprayer, front and rear lighting lamps, rear lighting
lamp, front lighting lamp, back light, warning lamp and rain wiper will be controlled separately by
this switch. Refer to
1.1 Control System and the Gauge Figure 3-1
in this chapter.
