5
3. Intended use
The charger features a charging/discharging channel with an XT60 connection. It also comes with a built-in balancer
for multi-cell lithium batteries. It can be controlled via a two-line backlit display and four control buttons.
The charger is designed to charge and discharge NiMH/NiCd batteries (1 - 15 cells), LiPo/LiIon/LiFe/LiHV batteries
(2 - 6 cells) and lead-acid batteries (1 - 10 cells, 2 - 20 V).
The charging current can be adjusted from 0.1 A to 6.0 A (depending on the number of cells/battery voltage). The
maximum total charging power is 60 W.
The discharge current can be adjusted from 0.1 A to 2.0 A (depending on the number of cells/battery voltage). The
maximum total charging power is 5 W.
The charger features a connection for a temperature sensor (not included, available separately), which can be used
to monitor the charging process.
The charger is powered by a 11 - 18 V/DC stabilized direct voltage (e.g. an external car lead battery or a suitable
power adapter).
Always observe the safety information and all other information in these operating instructions!
Read the operating instructions carefully and keep them in a safe place for future reference. Always provide these
operating instructions when giving the product to a third party.
Using this product for any purposes other than those described above may damage the product and result in a short
circuit, fire or electric shock. This product must not be modified or reassembled. Do not attempt to open the device
housing.
This product complies with statutory national and European regulations.
4. Package contents
•
Multi-functional charger
•
Connection cable with crocodile clips
•
CD with operating instructions
•
Information sheet with safety instructions
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
