33
The following settings are available:
The available settings depend on the selected battery type (LiPo, Li-on, LiFe, LiHV, NiMH, NiCd, Pb). For
example, you can only configure the end charging voltage per cell for lithium batteries.
Select the battery type first, and then configure the other settings to ensure that the charger displays the
correct settings options.
Battery type
Select the battery type ("LiPo", "LiIo", "LiFe", "LiHV", "NiMH", "NiCd" or "Pb").
As stated above, the battery type must be selected first to ensure that the charger displays the correct
settings options.
Battery voltage
This setting allows you to configure the battery voltage for the selected battery type.
The available voltage settings depend on the rated voltage of an individual cell (see section 7).
For example, if the rated voltage of a cell in a LiPo battery is 3.7 V, the voltage can only be adjusted in
increments of 3.7 V (3.7 V, 7.4 V, 11.1 V etc.).
Charging current
Configure the desired charging current. This must be selected according to the battery type.
The charging capacity of the charger (max. 60 W) limits the maximum possible charging current (see sec-
tion 9d).
Discharge current
Configure the desired discharge current. This must be selected according to the battery type.
The discharge capacity of the charger (max. 5 W) limits the maximum possible discharge current (see
section 9d).
BATT TYPE
LiPo
BATT VOLTAGE
7.4V(2S)
CHARGE CURRENT
2.0A
DISCHG CURRENT
1.0A
