37
16. Displaying the voltage for lithium batteries
The charger can display the voltages of cells in a lithium battery (LiPo, Li-ion, LiFe, LiHV).
To display the cell voltages, the lithium battery must have a balancer connection that is connected to the
corresponding socket on the charger.
Follow the steps below:
•
From the main menu, use the "INC." or "DEC." buttons to select "BATT
METER".
• Press the "ENTER/START" button to confirm your selection.
The voltage will be displayed.
•
Press the "INC." or "DEC." buttons to switch between the individual cell volt-
ages/total voltage and the maximum/minimum cell voltage.
The number of cell voltages displayed depends on the number of battery
cells. The right-hand screenshot may indicate a 3-cell LiPo battery (or a
multi-cell LiPo battery with defective cells/defective balancer sockets).
After you press the "INC."/"DEC." button to switch to voltage display mode,
the total voltage of the connected battery pack will be displayed on the top
line.
The maximum cell voltage ("H") will be displayed in the bottom-left corner.
The minimum cell voltage ("L") will be displayed in the bottom-right corner.
This enables you to view the difference in voltage between the cells.
Press the "BATT./STOP" button to return to the main menu.
BATT/PROGRAM
BATT METER
4.19 4.15 4.18 V
0.00 0.00 0.00 V
MAIN: 12.52V
H4.190V L4.150V
