35
Delay time for delta-V detection (only for NiMH and NiCd batteries)
The charger stops the charging cycle for NiMH and NiCd batteries using Delta-V control.
Use this setting to configure how long the charger should continue charging after the Delta-V detection.
Save the settings
See the next section (section 15. b) for details.
b) Saving battery data
To save the settings, select "SAVE PROGRAM", and then press the "ENTER/
START" button, otherwise the settings will be deleted.
The charger will display a message ("SAVE...") and beep to indicate that the
settings have been saved.
When you select "BATT MEMORY" mode from the main menu followed by a
preconfigured memory slot, the charger will display the most important data
(see right-hand screenshot).
This gives you an overview of which data is stored in the memory.
If the memory slot is empty, "ENTER SET ->" will be displayed.
PEAK DELAY
1Min
SAVE PROGRAM
ENTER
SAVE PROGRAM
ENTER
SAVE PROGRAM
SAVE....
[ BATT MEMORY 1]
LiPo 7.4V(2S)
[ BATT MEMORY 1]
C:2.0A D:1.0A
