42
Enabling/disabling button confirmation/notification tones
Use the "Key Beep" function to enable ("ON") or disable ("OFF") button confirmation tones.
Use the "Buzzer" function to enable ("ON") or disable ("OFF") notification/warning tones.
Displaying the firmware version
The hardware version is displayed in the bottom-left of the display (1.00 in this example). The current firmware version
is displayed in the bottom-right corner (2.00 in this example).
Restoring factory settings
This feature enables you to restore factory settings.
When the above screen is displayed, press and hold the "ENTER/START" button for 3 seconds. "COMPLETE" will
appear on the bottom line of the display. The charger will restart and load the main menu.
All previously configured settings will be restored to the factory defaults. The data in the 10 memory slots
(see section 15) will also be deleted.
Load Factory Set
ENTER
Version
HW:1.00 FW:2.00
Key Beep ON
Buzzer ON
