31
• To change the discharge current, press the "ENTER/START" button. The discharge current will start to flash. Press
the "INC." and "DEC." buttons to change the current. Hold down the button to move through the values more quickly.
• Press the "ENTER/START" button to confirm the discharge current.
•
Hold down the "ENTER/START" button for approximately 3 seconds to start the discharge cycle.
If the settings are wrong, or if the charger detects a problem, the charger will beep and a message will be
shown on the display. Press the "BATT./STOP" button to silence the charger and go back to the previous
settings menu.
The display shows the following data during the discharge cycle:
The battery type is shown in the top-left of the display ("P" = lead-acid bat-
tery). The discharge current is shown in the middle of the top line, and the
current battery voltage is shown in the top-right corner.
The current battery program is shown in the bottom-left of the display ("DCH" = "DICCHARGE"). The elapsed time
is shown in the middle of the bottom line, and the discharged capacity (in mAh) is shown in the bottom-right corner.
•
The charger beeps when the discharge cycle is complete (provided that this feature has not been disabled).
To stop the discharge cycle, press the "BATT./STOP" button.
14. DJI Mavic batteries
This feature is designed to charge DJI Mavic batteries. It is similar to the specifications used for charging LiHV batter
-
ies. A suitable charging cable is required to connect the battery (not included).
The charger must display the main menu.
Use the "INC." or "DEC." buttons to select the battery type ("DJI Mavic BATT",
see right-hand screenshot).
See section 11 for more information on the available battery programs.
After you have connected the battery and enabled the battery pro-
gram, switch on the battery when "TURN ON BATTERY BEFORE
CHARGING" is displayed.
P-6 0.4A 12.59V
DCH 022:45 00132
BATT/PROGRAM
DJI Mavic BATT
Li3S CHARGE
TURN ON BATTERY
Li3S CHARGE
BEFORE CHARGING
