Massage function
Fig. 84 In the lower area of the driver seat:
button for massage function.
When the massage function is switched on,
the lumbar support moves and massages the
lumbar region.
The curvature of the lumbar support (mas-
sage intensity) can be individually adjusted in
three levels during operation by repeatedly
pressing the corresponding switch
Switching the massage function on or off
To switch on, press the
button in the seat
touch panel. To switch off, press the but-
ton again.
The massage function is switched off auto-
matically after approximately ten minutes.
WARNING
Incorrect use of the seat functions can
cause serious injuries.
·
Always assume a correct sitting position
before you start driving and maintain
this position throughout the trip. This al-
so applies to all passengers.
·
Switch the massage function on and off
only when the vehicle is stationary.
·
Keep hands, fingers, feet and other body
parts away from the seat’s moving parts
and adjustment range.
Lights
Turn signals
Switching turn signals on and
off
Fig. 85 On the left-hand side of the steering
column: turn signal and main beam lever.
— Switch on the ignition.
— Move the turn signal and main beam lever
from the centre position to the following
:
—
A
Right turn signal .
—
B
Left turn signal .
— Return the turn signal and main beam lev-
er to the basic position in order to switch
off the turn signal.
Go to a qualified workshop if the acoustic
signal does not sound when a turn signal is
switched on and have the vehicle checked.
Convenience turn signal
To operate the convenience turn signal, push
the turn signal and main beam lever up or
down to the point where you meet resistance
and then release the lever. The turn signal
flashes three times.
To cancel the convenience turn signal, imme-
diately move the lever in the opposite direc-
tion up to the pressure point and then release
it.
102
Lights
