Volkswagen ID.4, Owner'S Manual

Page: 103 / 417

Memory function
Fig. 83 On the outside of the driver seat: mem-
ory buttons.
Memory buttons
The memory buttons can be used to store
and recall settings for the driver seat and the
exterior mirrors.
Storing driver seat and exterior mirror set-
tings for driving forwards
— Switch on the electronic parking brake.
— Put the gearbox into neutral.
— Switch on the ignition.
— Adjust the driver seat and exterior mirrors.
— Press the
button for longer than
one second → Fig. 83 .
— Press the desired memory button within
approximately 10 seconds. An acoustic
signal confirms that the settings have
been stored.
Storing front passenger exterior mirror set-
tings for reversing
— Switch on the electronic parking brake.
— Put the gearbox into neutral.
— Switch on the ignition.
— Press the desired memory button
→ Fig. 83 .
— Select reverse gear.
— Adjust the exterior mirror on the front
passenger side so that you have a good
view of the kerb area, for example.
The settings for the mirror position will be
saved automatically and assigned to the vehi-
cle key that was used to unlock the vehicle.
Accessing driver seat and exterior mirror set-
tings
— When the vehicle is stationary, the ignition
is switched off and one vehicle door is
open, briefly press the corresponding
memory button. After around 10 minutes,
the stored positions can no longer be ad-
justed automatically. The adjustment
process is cancelled if one of the memory
buttons is pressed again.
OR: with the driver door closed or ignition
switched on, press and hold the corre-
sponding memory button until the stored
position has been attained.
The front passenger exterior mirror will leave
the reversing position automatically if the ve-
hicle drives forwards at a speed of at least
around 15 km/h (10 mph) or if you turn the
rotary knob for the exterior mirror out of the
R position and into another position.
If the driver door is opened later than
approximately 10 minutes after un-
locking the vehicle, the driver seat and exteri-
or mirrors are not automatically adjusted.
Convenient entry function
When the driver door is opened, the driver
seat automatically moves to a position which
makes it easy to enter and exit the vehicle.
The driver seat moves back to its original po-
sition automatically as soon as the driver
door is closed and the ignition is switched on.
You can switch the convenient entry function
on and off in the Infotainment system.
Seat functions 101
11A012720AB