Volkswagen ID.4, Owner'S Manual

Page: 102 / 417

— Adjust the head restraint so a correct sit-
ting position can be assumed.
Fig. 81 Rear head restraint: removing.
Removing the rear head restraints
— If necessary, adjust the backrest so that
the head restraint can be removed.
— Push the head restraint all the way up.
— Pull the head restraint out fully while
pressing the button → Fig. 81
1
.
Fitting the rear head restraints
— Release the rear seat backrest and fold the
backrest forwards slightly.
— Position the head restraint correctly over
the head restraint guides and then insert
into the guides of the corresponding seat
backrest.
— Press and hold the button →
Fig. 81
1
and push down the head restraint.
— Fold back the rear seat backrest and allow
it to engage securely.
— Adjust the head restraint so a correct sit-
ting position can be assumed.
Seat functions
Centre armrest
Fig. 82 Rear fold-out centre armrest (illustra-
tion).
Rear centre armrest
There may be a fold-out centre armrest in the
backrest of the middle seat of the rear bench
seat.
— To
fold it down : pull the loop in the direc-
tion of the arrow → Fig. 82 .
— To fold it back : fold the centre armrest up-
wards in the opposite direction of the ar-
row → Fig. 82 and push it into the back-
rest as far as it will go.
Do not use the middle seat on the rear bench
seat to transport passengers when the centre
armrest is folded down.
WARNING
The rear centre armrest must always be
folded up while the vehicle is in motion in
order to reduce the risk of injury.
·
The centre seat on the rear bench seat
must never be used when the centre
armrest is folded down – neither by
adults nor children. An incorrect sitting
position can cause severe injuries.
100 Seats and head restraints