SmartCrystal™ Diamond
n ° : MUV140036
Version : A12
USER MANUAL
Date : 11/01/2018
www.volfoni.com
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission.
34
3.
The SmartCrystal™ Diamond box tilt adjustment and locking
STEP 48
Adjustment of the SmartCrystal™ Diamond Box position
The purpose of this step is to position the SCD Box properly towards the
light coming from the projector.
•
Make the carriage slide so that the beam of light from the projector
lights up the side of the SmartCrystal™ Diamond Box
(See Fig 19which shows a view from above).
This process can be carried out using the left side or the right side of the
SmartCrystal™ Diamond box.
Move 3D bracket position sensor until you obtain a maximum of light on the side of the SCD
STEP 49
By having a look on “Center alignment”
Adjust bracket height
Adjust bracket tilt
Image input has to be well centered
Image output has to be well centered
Fig 19
