SmartCrystal™ Diamond
n ° : MUV140036
Version : A12
USER MANUAL
Date : 11/01/2018
www.volfoni.com
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission.
53
At the end of the previous adjustment, the superimposition might not be optimum.
The three previous steps need to be repeated, proceeding to a finer fitting until you get a satisfying
result. The adjustment is satisfying when there is no splitting information on the lower half image.
•
Final locking
Now as the adjustment of the bottom image is completed
you have to lock it.
To do so, you have to maintain in position the top part of
the adjustable wheel (1)
then screw (rotate clockwise) the bottom part of the
adjustable wheel (2) until the stop.
The locking can have a slight impact on the ‘Scale/zoom’
size fitting.
In this case you have to unlock the adjustable wheel (do
the opposite of the previous step) then start over until
finding the good balance.
THE LOWER HALF IMAGE ADJUSTMENT IS
COMPLETED.
Fig 34
