SmartCrystal™ Diamond
n ° : MUV140036
Version : A12
USER MANUAL
Date : 11/01/2018
www.volfoni.com
This document is the property of the Co VOLFONI and may not be reproduced or disclosed without permission.
7
I.
GENERAL PRESENTATION
1.
SmartCrystal™ Diamond (SCD) presentation
Each SmartCrystal™ Diamond is made up by the following components:
SmartCrystal™ Diamond Box (opto-mechanical unit)
SmartCrystal™ Diamond Controller (electronic unit)
One set of 3-D bus cables (GPIO37-BNC, SubD15-BNC, BNC-BNC),
Connection cable between SCD Box and SCD Controller (SubD9 M/F),
Feeder cable (220/110V) with US, EU, UK, AUS plugs.
Software maintenance cable (USB A-USB B)
Volfoni passive glasses (2 pairs)
Optional anti-reflection filter for room window
USB key with aligning pattern and technical data
Tools, holding screws
Cleaning wipe
Quick Start
1-
USB Key + Wipes (x2)
2-
RJ45 Cable (
Used for network control)
3-
USB-A / USB-B (cable
for maintenance with Volfoni Software
)
4-
SmartCrystal Diamond Controller
5-
SmartCrystal Diamond System
6-
Polarization Filter
Optional filter. (Only use in case of abnormal reflections)
7-
SUB-D 9pts
Dedicated to connect SCD Controller and SCD System
8-
GPIO-15 pins & BNC / BNC ( Cables
3D Synchronization cable)
9-
Passive glasses VPPG-03000 (x2)
10-
GPIO-37 pins Cable
3D Synchronization cable
11-
International plugs
(EU, US, AUS, China, and UK)
12-
Power supply
for the SCD Controller
Each SmartCrystal™ Diamond will be delivered
with a bracket which must be installed while
respecting the instructions of its user guide.
Fig 01
