CONDEXA PRO
61
- Replace the calibrated diaphragm fitted on the gas
valve with the diaphragm (4) supplied inside the kit,
marked “
6.5
”.
Only if the boiler is supplied by a mixture of gases that
causes ignition problems, use the other diaphragm (5)
marked “
6.75
”.
- Reassemble the gas valve
- Apply the sticker (6) for G30-G31, supplied inside the
kit, on the inside of the panelling, and remove the
sticker for G20
- Remove the G20 gas label from the inside of the frame.
4
6.5
6.75
5
Country of destination:
Type of appliance
Boiler category
:
:
II
2H3+
Gas supply pressure:
G20
G30+G31
20 mbar
28-30/37 mbar
Manufacturer settings:
G20 - 20 mbar - 2H NATURAL GAS
WARNING
Carefully read the instruction manual before
installing and star ting the appliance.
(Laterale DX)
B23, C63
068465EN_1_E0
Boiler regulated for:
G30 - G31 28-30/37 mbar
Destination country:
GB - IE
6
After having installed the kit make sure that:
- All the joints made are tight
- All the calibration operations described in the
"Adjustments" paragraph below have been completed.
Summary of Contents for CONDEXA PRO 100 S
Page 72: ...CONDEXA PRO 72...
Page 73: ...CONDEXA PRO 73...
Page 74: ...CONDEXA PRO 74...
Page 75: ...CONDEXA PRO 75...