CONDEXA PRO
57
ERRORS ON THE SLAVE BOARD
List of slave errors: manual reset (see ref. 3 on page 18)
If slave errors with manual reset occur, the Slave reset button can be used (see ref. 13 on page 18).
No.
Error
A 01
5 failed attempts at ignition
A 02
Too many failed ignitions
A 04
Gas valve relay error
A 05
Gas valve relay error
A 06
Safety relay does not close
A 07
Safety relay does not open
A 08
Safety relay open when should be closed
A 09
RAM error
A 10
EEPROM error
A 11
Fan error
A 12
Incorrect EEPROM signature
A 16
Safety relay closed when should be open
A 17
Outlet sensor error for having exceeded the max. outlet temperature
A 18
Return sensor error for having exceeded the max. return temperature
A 19
Flue gas sensor error for having exceeded the max. flue gas temperature
(with this error the fan operates at maximum speed )
A 20
The flame is extinguished too late after the gas valve closes
A 24
Fan error
List of slave errors: automatic reset
NO.
Error
E 33
Phase error
E 34
Reset button error
E 35
Water pressure switch error – contact not closed
E 36
EEPROM reading error
E 37
Flame detection error – line and neutral reversed
E 38
Flue gas probe short-circuited
E 39
Flue gas probe open
E 40
50 Hz error
E 41
Communication error
E 42
Outlet probe short-circuited
E 43
Outlet probe with contact open
E 44
Return probe short-circuited
E 45
Return probe with contact open
E 46
Outlet probe error for having exceeded the temperature limit
E 47
Return probe error for having exceeded the temperature limit
E 48
Flue gas probe error for having exceeded the temperature limit (with this error, the fan operates at max.)
Summary of Contents for CONDEXA PRO 100 S
Page 72: ...CONDEXA PRO 72...
Page 73: ...CONDEXA PRO 73...
Page 74: ...CONDEXA PRO 74...
Page 75: ...CONDEXA PRO 75...