CONDEXA PRO
33
The
CONDEXA PRO 50 M
and
100 M
boilers leave the factory completely wired, with the power cable already connec-
ted, and only require the connection of the room thermostats, the outside probe and the pumps used, to the correspon-
ding terminals. For the
CONDEXA PRO 100 S
boiler, only the Bus cable needs to be connected (see the wiring diagram
on page 16).
To do this:
- Move the main system switch to "off"
- Unscrew the fastening screws (1) on the front panel (2)
- Pull the base of the panel (2) outwards and then
upwards to release it from the frame and then remove
it
- Turn the control panel (3) and remove the rear cover,
taking out the locking screws (4)
2
1
4
3
ON
OFF
ELECTRICAL CONNECTIONS
Summary of Contents for CONDEXA PRO 100 S
Page 72: ...CONDEXA PRO 72...
Page 73: ...CONDEXA PRO 73...
Page 74: ...CONDEXA PRO 74...
Page 75: ...CONDEXA PRO 75...