CONDEXA PRO
60
ON
OFF
3
2
1
The
Vokera CONDEXA PRO
Boiler is supplied for ope-
ration on G20 (natural gas). However, it can be conver-
ted for operation on G30-G31 (LPG), using the special
kit supplied.
Before performing the conversion:
- Disconnect the power supply from the appliance by
moving the main switch to "off";
- Close the fuel valve.
To install the kit:
- Unscrew the fastening screws (1) on the front panel (2)
- Pull the base of the panel (2) outwards and then
upwards to release it from the frame and then remove
it
- Set parameter 36 to 3 or 4, according to the length (L)
of the flue:
3 = L < 15 m
4 = L > 15 m.
The fan speed is controlled automatically.
- Disassemble the gas valve from the fan assembly by
loosening the three screws (3)
b
The conversion must only be carried out by
Vokera
Ltd
or personnel authorised by
Vokera
, even when
the boiler is already installed.
b
Once the conversion has been completed, set the
boiler again as described in the paragraph on
"Adjustments".
CONVERSION FROM ONE TYPE OF GAS TO THE OTHER
Summary of Contents for CONDEXA PRO 100 S
Page 72: ...CONDEXA PRO 72...
Page 73: ...CONDEXA PRO 73...
Page 74: ...CONDEXA PRO 74...
Page 75: ...CONDEXA PRO 75...