Access to Control Terminals
All terminals to the control cables are located un-
derneath the terminal cover on the front of the
adjustable frequency drive. Remove the terminal
cover with a screwdriver.
A2 and A3 enclosures
Remove front cover to access control terminals.
When replacing the front cover, ensure proper
fastening by applying a torque of 2 Nm.
A5, B1, B2, C1 and C2 enclosures
Electrical Installation, Control Terminals
To mount the cable to the terminal:
1.
Strip isolation of 0.34-0.39 in [9-10 mm]
2.
Insert a screw driver
1)
in the square hole.
3.
Insert the cable in the adjacent circular
hole.
4.
Remove the screwdriver. The cable is now
mounted to the terminal.
To remove the cable from the terminal:
1.
Insert a screw driver
1)
in the square hole.
2.
Pull out the cable.
1)
Max. 0.015 x 0.1 in. [0.4 x 2.5 mm]
1.
2.
3.
VLT
®
AutomationDrive FC 300 Instruction Manual
How
to
Install
26
MG.33.A8.22 - VLT
®
is a registered Danfoss trademark.