Line connection for A1, A2 and A3 frame sizes:
NOTE
The plug connector for power can be
removed.
Line connector A5 (IP 55/66) Enclosure
When the disconnector is used (A5 enclosure), the PE must be mounted on the left side of the drive.
Line connection B1 and B2 (IP 21/NEMA Type 1
and IP 55/66/ NEMA Type 12) enclosures
Line connection C1 and C2 (IP 21/ NEMA Type 1
and IP 55/66/ NEMA Type 12) enclosures
The power cables for line power are usually unshielded cables.
VLT
®
AutomationDrive FC 300 Instruction Manual
How
to
Install
MG.33.A8.22 - VLT
®
is a registered Danfoss trademark.
21