vii
Revision History
Hardware Reset / Mode Button
The reset button is used to reboot the PoE switch or to restore the factory default settings. Sometimes resetting
the system can return the PoE switch to normal operation. If the system problems remain after reset, restore the
factory settings and try again.
Reboot: Press
3~10
seconds and release the recessed reset button. Wait for the PoE Switch to reboot.
Reset to factory default: Press longer than
10
seconds and release the recessed reset button. Wait for the PoE
Switch to reset to factory default & Reboot.
The mode button is use to switch LED indicator’s mode.
Link / ACT/ Speed: Press shorter than
3 seconds
and release the recessed mode button. The Link / ACT/ Speed
LED will on.
Green when displaying Link/ACT/Speed status of Ethernet ports.
PoE : Press shorter than
3 seconds
and release the recessed mode button. The PoE LED will turn on.
Green when displaying the PoE link status with powered devices.
Release
Date
Revision
Initial Release
2016/08/25
1.0
FW0003 Release
2017/09/05
2.0
Summary of Contents for VivoCam AW-GEV-104B-130
Page 13: ...6 Figure 1 The login page ...
Page 25: ...18 Reset Click to undo any changes made locally and revert to previously saved values ...
Page 52: ...45 Reset Click to undo any changes made locally and revert to previously saved values ...
Page 136: ...129 Reset Click to undo any changes made locally and revert to previously saved values ...