Vivotek VivoCam AW-GEV-104B-130, User Manual

Page: 146 / 178

139
The number of RADIUS packets that were received from the server on the accounting port
and dropped for some other reason.

Requests :
The number of RADIUS packets sent to the server. This does not include retransmissions

Retransmissions :
The number of RADIUS packets retransmitted to the RADIUS accounting server.

Pending Requests :
The number of RADIUS packets destined for the server that have not yet timed out or
received a response. This variable is incremented when a Request is sent and decremented
due to receipt of a Response, timeout, or retransmission.

Timeouts :
The number of accounting timeouts to the server. After a timeout, the client may retry to the
same server, send to a different server, or give up. A retry to the same server is counted as a
retransmit as well as a timeout. A send to a different server is counted as a Request as well
as a timeout.

IP Address :
IP address and UDP port for the accounting server in question.

State :
Shows the state of the server. It takes one of the following values:

Disabled :
The selected server is disabled.

Not Ready :
The server is enabled, but IP communication is not yet up and running.

Ready :
The server is enabled, IP communication is up and running, and the RADIUS module is
ready to accept accounting attempts.

Dead (X seconds left) :
Accounting attempts were made to this server, but it did not reply within the
configured timeout. The server has temporarily been disabled, but will get re-enabled
when the dead-time expires. The number of seconds left before this occurs is displayed
in parentheses. This state is only reachable when more than one server is enabled.

Round-Trip Time :
The time interval (measured in milliseconds) between the most recent Response and the
Request that matched it from the RADIUS accounting server. The granularity of this
measurement is 100 ms. A value of 0 ms indicates that there hasn't been round-trip
communication with the server yet.