96
Instance Config :
To provision spanning tree performance parameters per instance.
Port Config :
To provision spanning tree performance parameters per instance per port.
Instance Status :
To show the status report of a particular spanning tree instance.
Port Status :
To show the status report of all ports regarding a specific spanning tree instance.
Please refer to the following introduction:
Add Vlan :
Figure 7-3: Add Vlan
Parameter description:
Instance ID :
The Range is 1-4094
Vlan Mapping :
The list of VLANs mapped to the MSTI. The VLANs can be given as a single (xx, xx being
between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with
comma and/or space. A VLAN can only be mapped to one MSTI. An unused MSTI should
just be left empty. (I.e. not having any VLANs mapped to it.) Example: 2,5,20-40.
Buttons
Apply :
Click to save changes.
Reset :
Click to undo any changes made locally and revert to previously saved values.
Cancel :
Click to undo any changes made locally and return to the Users.
Instance Config to Instance 0 :
Summary of Contents for VivoCam AW-GEV-104B-130
Page 13: ...6 Figure 1 The login page ...
Page 25: ...18 Reset Click to undo any changes made locally and revert to previously saved values ...
Page 52: ...45 Reset Click to undo any changes made locally and revert to previously saved values ...
Page 136: ...129 Reset Click to undo any changes made locally and revert to previously saved values ...
